Tilting The Cab; Cleaning; Defrosting; Fault Tracing - Volvo FM Handbook

370 Fridge
generate a voltage boost that automatically resets the
voltage monitor.

Tilting the cab

Before the cab is tilted, the refrigerator box should be
emptied of its contents and switched off. Close the
refrigerator door before tilting the cab.

Cleaning

Clean the refrigerator box with a cloth with lukewarm
water and ordinary washing-up liquid. Make sure that
it does not force water into the packing or into the
switch. Then dry with a dry cloth. Clean the
refrigerator box both inside and outside at regular
intervals or as soon as it becomes dirty.

Defrosting

Air humidity can cause ice formation that reduces the
cooling effect. Defrost in good time by taking out all
food and putting it another refrigerator or freezer
compartment so that it keeps cold. Turn off the
refrigerator and leave the door open. Let the ice melt
and then dry up the water thoroughly. Clean with a
cloth with lukewarm water and ordinary washing-up
liquid, and it is ready for use.

Fault tracing

If the refrigerator box does not work, first check that
the voltage monitor is not triggered. See "Voltage
monitor" for actions. If the fault remains, check the
fault codes below and contact your Volvo dealer.
If the prism on the outside of the refrigerator box
shows green, the unit is operating correctly. If the
prism shows red, there is a fault in the refrigerator box
and the drawer must then be pulled out so that the fault
code on the PCB panel can be checked.