Oil change
1
Clean around the drain plug (C) and the filler
plug (B).
2
Unscrew the drain plug (C) and drain the oil.
Unscrew the filler plug (B).
3
Fit the drain plug (C). If the sealing ring on the
plug is damaged, it must be replaced.
4
Fill new oil into the transfer gearbox until the oil
level reaches the centre of the transparent level
plug (A) (maximum and minimum oil level, see
illustration).
5
Refit the filler plug (B). If the sealing ring on the
plug is damaged, it must be replaced.
Maintenance 565
J1007655
J1007661
J1007656