Table of Contents
Advertisement
640 If something happens
The entire screw comes out
Unscrew the nut until the brake releases. The nut and
screw come out of the brake cylinder.
Screw the screw back in and replace the plastic cap
after towing.
Only the nut shows
When you start to unscrew the nut, a red plastic button
comes out of the centre of the nut. After about four
turns it is completely out but another 45 turns or so are
required for the brake to be completely released.
After towing: Screw the screw back in until the red
plastic button goes all the way in.
Caution!
Never loosen or tighten the nut
mechanically when loosening or
replacing the hand-operated
parking brake. The cylinder can
be damaged.
J0009318
J0009317
Advertisement
Table of Contents
