Table of Contents
Advertisement
208 Powertronic
SN = Safety Neutral
When "EN" is shown in the display, an electronic fault
has been indicated on one or more solenoid valves
which can cause damage to the gearbox. Gears that are
not affected can still be used. To engage a gear that is
higher than the damaged gear, the vehicle must be
accelerated to a faster speed so that the gearbox can
skip a gear. Use manual gear changing. Contact a
Volvo workshop.
When "SN" is shown in the display, the gearbox main
pressure is too low to be able to leave N. If "SN" is
shown when the gearbox is cold, run it warm in N and
try to engage the gear again.
3. Available gears
To the left of the lever position section is a section
with arrows showing the number of lower gears that
are available. To the right of the lever position section
is a section showing, in the same way, the number of
higher gears that are available.
The gearbox must be in manual mode in order to
utilize the available gears.
The gears are selected by the +/– button.
4. Lever position
The section in the middle of the display shows the gear
shifter's position.
A = Automatic
M = Manual gear changing
N = Neutral
R = Reverse gear
A flashing A, M, N or R indicates that Autoneutral
(option) is engaged. The gearbox is in neutral but the
gear shift lever is in drive position.
Advertisement
Table of Contents
