Table of Contents
Advertisement
Engaging Lane Keeping Support
The system is operated via a switch on the instrument
panel. When the system is switched off, no icons are
displayed. When the system is switched on, the status
is shown with two icons, see below.
When the system is SWITCHED ON and ACTIVE
the following symbol is shown on the display. That the
system is ACTIVE means that the system will warn
the driver with unintentional deviations from the
driving lane.
When the system is SWITCHED ON but
INACTIVE the following symbol is shown on the
display. The system will NOT warn the driver with
unintentional deviations from the driving lane.
Examples of when the system is inactive are; when
there are no lane markings or poor markings, when the
speed is below 60 km/h.
When the system is active, a warning signal is
generated from the instrument panel. The signal is a
long, repeated signal that resembles the noise from
lane edge markings.
When does the system warn?
The system warns the driver when the truck crosses
lane markings and the following conditions are
fulfilled:
• The system is SWITCHED ON
• The system is ACTIVE
• The truck speed is 60 km/h or higher
• The driver has not used the direction indicators or
recently touched the brake pedal
The system does not effect the brakes, steering or any
other system in the truck. It only emits an audible
Driving 171
11:45
7,658.8 km
11:45
7,658.8 km
AM
AM
Advertisement
Table of Contents
