Instruments and controls
22
Lighting and headlamps
The equipment may vary in different markets.
Headlights
• Parking lights: Turn the lighting switch (1) to b.
• Dip beam: Turn the lighting switch (1) to c.
• Main beam: Turn the lighting switch (1) to c and
pull the main beam stalk towards you.
• Main beam and additional lamps (spotlights):
Turn the lighting switch (1) to d and pull the main
beam stalk towards you.
1
Lighting switch
2
Indicator for front fog lamp
3
Indication (repeater) for rear fog lamp
4
Instrumentation lighting
5
Vertical adjustment of headlamps (extra)
6
Hazard warning flashers
Day Running Light
Turn the lighting switch (1) to position a. The dipped
beam and the parking lamps will come on when the
engine is started.
Fog light
The light switch (1) must be positioned in b, c or d for
the fog lamp to come on. In position b, the rear fog
lamps only function if the front fog lamps are lit.
• Front fog lamp: Push the lighting switch in (1).
Indicator lamp (2) lights. Extinguish the fog lamp
by pressing in the lighting switch (1) again.
• Rear fog lamp: Pull out the lighting switch (1).
The indicator lamp (3) and the control lamp light
up. Extinguish the rear fog lamp by pulling out the
lighting switch (1) again.
Stalk for main beam and direction
indicators.
J0010330
J3015656