Table of Contents
Advertisement
Information display
34
The first that is shown
The display lights up when the key is turned to the
drive position.
If there are no active vehicle messages, the favourite
display is shown. You select what is to be displayed,
see "favourite display, setting".
The favourite display is shown all the time if there are
no vehicle messages to show or unless you select one
of the menus. To enter the menu system in the display,
press "SELECT" on the control unit. See section
"Menus" for more information about the menus.
If there are vehicle messages, these are shown instead
of the favourite display. The number of the message
shown and the total number are shown in the upper
right corner. 3/3, for example, means that the vehicle
message currently being displayed is the third message
of three active messages. Step between the vehicle
messages using ▲ and ▼. Take suitable actions and
then acknowledge them with "Esc". For more
information about vehicle messages, see section
"Messages and symbols".
General, about messages
If there is a fault in the truck or if something happens
that requires attention, such as the outdoor temperature
approaching freezing point, a vehicle message is
displayed or a symbol appears in the display.
If several messages appear at the same time, only the
most important message is displayed. Step between the
vehicle messages using ▲ and ▼.
To obtain more detailed technical information about
vehicle messages, see section "Fault diagnosis".
75ºC
15ºC
98ºC
CC
11:45
AM
7658.8 Km
Advertisement
Table of Contents
