Table of Contents
Advertisement
498 External equipment
2
Remove the three M10 bolts which hold the
tubular stay. Remove the stay.
3
Unwind the strap on the winch so that the wheel
can be rolled out to the edge of the retainer. The
strap should be stretched in this position. Check
that the wheel can be winched down to the ground
without any risk of passing traffic.
4
Winch the wheel down to the ground. Remove the
support strap.
90°
Caution!
Avoid holding a ahand on the
upper edge of the retainer
(under the winch) as there is a
risk of fingers being trapped by
the lever.
Advertisement
Table of Contents
