Table of Contents
Advertisement
452 Dynafleet
Emergency alarm button
There is an emergency alarm button in the instrument
panel or on the radio shelf. The button must be held
pressed in for at least three seconds for an alarm
message to be sent. Depending on the settings for the
office the request is sent to the office and
VAS (Volvo Action Service) or Security Services. If
the tool Dynafleet Driver is installed in the vehicle,
pop-up messages inform the driver of status updates
for the ongoing request.
Extra equipment:
After using the emergency button or writing an
assistance request you will always be called by an
operator on a telephone number specified in the
Dynafleet online portal. The intention of the call is to
get confirmation of the action you initiated. If you do
not receive such call within reasonable time, your
initial request might have failed because of influences
beyond our control. We then recommend trying to
reach our services via more conventional methods.
Display
Note!
The emergency assistance button
only functions when the system is
switched on or during standby. We
advice adjusting the standby time to
a suitable level to secure availability
of the feature. (Standby time is
configurable in the Dynafleet online
portal. Check with the administrator
to make these changes).
J3011613
J3015818
Advertisement
Table of Contents
