Lan - IDK MSD-702UHD User Manual

MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide

9.12 LAN

■ LAN communication
The internal switching hub enables connections between the MSD's LAN connector and LAN connectors of
twisted pair cable transmitter and receiver that are connected to HDBaseT I/O connectors. Bidirectional
communication is also available.
Communication command control from PC to the MSD and control command output from the MSD to external
devices can be executed from all LAN ports. Operation mode will be switched according to the setting of
"9.12.2 LAN operation mode". The MSD has eight connections that can be set individually.
LAN cable
Laptop
Bidirectional
communication
LAN cable
Communication command control to MSD
Laptop
MSD-802UHD (Front)
The MSD does not support automatic acquisition of IP address using DHCP (Dynamic Host Configuration
Protocol). If you use the MSD in a network with DHCP, keep a fixed IP address. If controlling peripheral
devices connected over LAN from the MSD, keep several fixed IP addresses.
92
Bidirectional communication
Communication command control to MSD
Twisted pair cable
Twisted pair cable
transmitter
1 2
[Fig. 9.22] LAN operation
【See: 9.13 Setting control command】
Twisted pair cable
Communication command control to MSD
Twisted pair cable
Communication command control to MSD
MSD-802UHD (Rear)
Switching hub
Connections
3 4 5 6 7 8
Control unit
LAN cable
Twisted pair cable
receiver
Laptop
LAN cable
Twisted pair cable
receiver
Laptop
Bidirectional
communication