Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
■"AUTO-A" and "AUTO-B":
"AUTO-A" (OUTA, HDMI output connector), "AUTO-B" (OUTB, HDBaseT output connector):
Automatically selects the optimal output resolution format depending on the EDID of the connected sink
device. The optimal format is then provided to the connected sink device via the MSD's output connector. The
actual output resolution is displayed in parentheses. In case EDID cannot be obtained from the sink device,
the resolution format that was last used is selected. This condition is indicated by an asterisk "*" to the right
side of the format data.
If the EDID of the connected sink device is higher than 2160p@30, an asterisk "*" is indicated to the right side
of the format data.
48
[OUT1 RESOLUTION]
AUTO(1080p59.94)
Outputting at optimal resolution
[OUT1 RESOLUTION]
AUTO(1080p59.94)*
EDID cannot be loaded or optimal
resolution cannot be output
Advertisement
Table of Contents
