Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
9.14.6
Copying output setting
Menu
Top→PRESET MEMORY→COPY OUTPUT MEMORY
Setting value OUT1 → OUT2,OUT2 → OUT1
You can copy the setting data of the selected output channel to other output channels. The setting of this
menu is not updated until the MENU/SET key is pressed. Make sure to press the MENU/SET key to update
the setting.
Menu
Switching input channel
Setting position, size,
and masking
Quality setting
Output settings
Audio setting
Bitmap setting
Note:
Please note that only one CEC connection is available, multiple input and outputs cannot be connected. For
example, CEC connection is copied from this menu, the lowest output (OUT1) is connected preferentially and
the sink device connected to OUT2 cannot output video with CEC.
112
[Table 9.32] Settings to be copied
Selecting input channels
Output resolution, Aspect ratio for sink device, Aspect ratio,
Aspect ratio control, Overscan, Display position, Display size, Masking,
Background color, Test pattern
Brightness, Contrast, Gamma
Output mode, Synchronous signal output with no input video,
Output video with no input video, Window transaction effect,
Video output connector, HDCP, The number of HDCP retries,
Deep Color, CEC connection, Priority of input channel automatic switching,
Masking time after automatic switching of input channel,
Channel switching mode of automatic switching,
HDBaseT output long reach mode
Output level, Output mute, Lip sync,
Sampling frequency, Audio output connector, Digital audio output connector,
Multi channel audio output, Multi channel audio output priority, Test tone
Outputting bitmap image, Background color, Aspect ratio, Display position,
Assigning input channel, Startup bitmap output
Description
Advertisement
Table of Contents
