Table of Contents
Advertisement
9.11.2
RS-232C operation mode
Menu
Top→COM PORT→FUNCTION
Setting for
RS-232C connector, OUT1B connector, OUT2B connector, IN8 connector
Setting value RECEIVER,TRANSMITTER
[Default]
RS-232C connector, IN8 connector: RECEIVER
OUT1B connector, OUT2B connector: TRAMSMITTER
You can set the operation mode to "RECEIVER" mode in which the MSD is controlled externally or
"TRANSMITTER" mode in which the MSD controls peripheral devices.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
9.11.3
RS-232C HDBaseT connection
Menu
Top→COM PORT→OUT B SCI CONNECT
Setting value [Table 9.18] RS-232C operation
You can set the communication between MSD's RS-232C connector and an RS-232C connector of twisted
pair cable transmitter or receiver that is connected to HDBaseT I/O connector.
Setting value
OFF [Default]
MSD's RS-232C connector operates in the mode that is set in "9.11.2 RS-232C operation
mode".
OUT1B
Communication between MSD's RS-232C connector and an RS-232C connector of
twisted pair cable transmitter or receiver that is connected to HDBaseT I/O connector.
OUT2B
The MSD's RS-232C connector cannot be used for communication command control from
IN8
PC to MSD or control command output from MSD to external devices.
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
[Table 9.18] RS-232C operation
Operation
【See: 9.11 RS-232C】
91
Advertisement
Table of Contents
