IDK MSD-702UHD User Manual page 32

MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
Menu
INPUT SETTING
INPUT VIDEO DETECT
HDCP INPUT ENABLE
ANALOG INPUT TYPE
INPUT OFF CHECK
INPUT AD TYPE
LONG REACH MODE
INPUT TABLE FIXED
INPUT TIMING
AUTO SETUP
H TOTAL DOTS
H START
H DISPLAY
V START
V DISPLAY
AUTO START POS
UNKNOWN TIMING
*1
Can be set and executed only if an analog RGB or YPbPr signal input is active.
32
[Table 8.6] Factory default (Cont'd)
For Each input channel, digital input only
Default 10000 ms
For Each input channel, digital input only
Default HDCP 2.2
HDCP 1.4
For Each input channel, each input signal, analog input only
Default AUTO
For Each input channel
Default ON
For Each input channel, DVI connector only
Default DIGITAL
For HDBaseT input channel
Default OFF
For Each input channel
Default [Setting mode]
SELECTED
[Individual setting ("SELECTED" is selected for setting
mode)]
ASPECT : OFF, ANALOG TYPE : ON(FIXED)
AUDIO LEVEL : ON(FIXED)
For Each input channel, each input signal,
analog input only
Default NORMAL MODE
For Each input channel, each input signal,
analog input only
Default Depends on input signal
For Each input channel, each input signal
Default Depends on input signal
For Each input channel, each input signal
Default Depends on input signal
For Each input channel, each input signal
Default Depends on input signal
For Each input channel, each input signal
Default Depends on input signal
For Each input channel, each input signal,
analog input only
Default ON
For ---
Default AUTO SETUP ON
Factory default
[IN1, IN2, IN8]
[IN3 to IN7]
*1
*1
*1
See:
P.57
P.58
P.59
P.60
P.60
P.60
P.61
P.63
P.65
P.65
P.66
P.65
P.66
P.67
P.67