Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
9.12.1
IP address/Subnet mask/Gateway address
Menu
IP address: Top→LAN→IP ADDRESS
Subnet mask: Top→LAN→SUBNET MASK
Gateway address: Top→LAN→GATEWAY ADDRESS
Setting value [Default] IP address: 192.168.1.199
You can set IP address, subnet mask, and gateway address.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
9.12.2
LAN operation mode
Menu
Top→LAN→FUNCTION
Setting for
Each connection
Setting value [Table 9.19] Setting items of LAN operation mode
Setting
Operation mode
Destination IP address
PJLink protocol connection
Destination connection
*1
number
PJLink protocol password
*1
If selecting "ON" for PJLink protocol, the target port number is fixed at "4352".
*2
Up to 32 characters. If you do not want the password authentication, you do not need to set the item.
You can set the LAN operation mode consisting of "RECEIVER" mode that controls the MSD externally and
"TRANSMITTER" mode that controls peripheral devices from the MSD.
If you select "TRANSMITTER" mode, you need to set the information of connecting device.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
94
Subnet mask: 255.255.255.0
Gateway address: 192.168.1.200
[Table 9.19] Setting items of LAN operation mode
Receiver mode
RECEIVER [Default]
－
－
－
*2
－
Operation mode
Transmitter
TRANSMITTER
0.0.0.0 to 255.255.255.255
[Default] 192.168.1.198
ON: Use
OFF: Not use [Default]
1 to 65535 [Default] 1100
20, 30 to 39, 41 to 5A, 61 to 7A in ASCII code
(in hex) [Default] 20 (space)
Advertisement
Table of Contents
