Table of Contents
Advertisement
[Table 5.3] Rear panel's part name and description (Cont'd)
#
Name
⑩
LAN connector
⑪
HDBaseT output
connector
⑫
HDMI output connector
⑬
Audio output connector
⑭
Frame ground
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
For external control by communication commands or web browsers
Output connector for HDBaseT signal
Connects to a receiver over a twisted pair cable.
【See: 9.8.16 HDBaseT output long reach mode】
Output connector for HDMI and DVI signal interfaces with sink devices
such as LC monitors and projectors
Analog audio output connectors interface to amplifiers, speakers, and
mixers.
Connector type: Terminal block (5-pin)
Use for bonding chassis to local ground. An M4 screw is used.
Description
【See: 7.2.3 Twisted pair cable for extension】
【See: 7.2.4 Connecting audio cables】
17
Advertisement
Table of Contents
