IDK MSD-702UHD User Manual page 138

4k@60 and hdcp 2.2 supported digital multi switcher
Hide thumbs Also See for MSD-702UHD:
Table of Contents

Advertisement

MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
Item
HDMI / DVI
Video
HDBaseT
Output
Format
Digital
Audio
Analog
Digital Input
Maximum
extension distance
Digital output
Analog video
processing unit
Scan Converter
Functions
Others
RS-232C
LAN
External control
Contact closure
Command control
External control
Power
Power consumption
Dimensions
General
Weight
Temperature
Humidity
*1
30 bit / pixel (10 bit / component) Deep Color is supported while x.v.Color, 3D, ARC and HEC are not supported.
WQHD, WQXGA, and 4K format: 24 bit / pixel (8 bit / component) is supported.
*2
HDBaseT input/output: DVI signals protected by HDCP are not supported. To transmit those signals, use an IDK's twisted pair cable extender supporting DVI signals.
*3
For PoH power feeding, please use an HDBaseT transmitter supporting IEEE 802.3af and AWG 24 twisted pair cable or thicker cable.
*4
RJ-45 (HDBaseT connector) is only for extending digital video and audio signals over a Cat5e / Cat6 twisted pair cable. Use it with IDK's twisted pair cable transmitter or receiver.
Do not use for LAN devices.
*5
T568A or T568B straight. The CAT.5E HDC cable is developed by IDK and recommended by HDBaseT alliance.
*6
4K format: Only CEA-861 timing is supported.
*7
HDBase output: 4K@60 (4:2:0) is not supported.
*8
The maximum cable distance varies depending on the connected devices and was measured under following conditions:
・1080p@60: when IDK's AWG 24 cable was used and signals of 1080p@60 24 bit / pixel (8 bit / component) was input or output.
・4K@60: when IDK's 18 Gbps supported cable was used and signals of 4K@60 24 bit / pixel (8 bit / component) was input or output.
The maximum cable distance depends on the connected devices. The distance may not be extended with some device combinations, cabling method, or other manufacturer's
cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
*9
The maximum extension distance was obtained when IDK's CAT.5E HDC cable was used. The distance may not be extended with some device combinations, cabling method, or
other manufacturer's cable. Video may be disturbed or may not be output even if signals are within the range mentioned above. Operations may not be stable with some LCD
devices; please check the operation beforehand or contact us.
The maximum extension distance is the shorter distance of connected HDBaseT product or sink device's maximum extension distance.
Up to 492 ft. (150 m): 1080p (24 bit) in Long reach mode. For Long reach mode, use IDK's twisted pair cable products that supports 328 ft. (100 m) or longer.
*10 Seamless switching with a black frame.
*11 The anti-snow feature automatically fixes snow noise that is a specific symptom of HDCP-compliant signals and mainly occurs at start-up. This feature does not work when snow
noise has already occurred during startup or when it occurs due to a bad condition of the transmission line.
*12 For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However, the
Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were
physically disconnected and reconnected. This feature only works for the MSD's output. If other devices are connected between the MSD's output and sink device, this feature
may be invalid.
*13 The sink device must support CEC. Some sink devices cannot be controlled from the MSD through CEC.
138
1 output
Output video can be distributed to an HDMI / DVI and HDBaseT simultaneously.
HDMI Deep Color (*1) / DVI 1.0
TMDS single link, HDCP 1.4 / 2.2
TMDS clocks: 25 MHz to 300 MHz, TMDS data rate: 0.75 Gbps to 18 Gbps
Connector: Female HDMI Type A (19-pin)
1 output
Output video can be distributed to an HDMI / DVI and HDBaseT simultaneously.
HDMI Deep Color (*1) / DVI 1.0
HDCP 1.4 / 2.2 (*2)
TMDS clocks: 25 MHz to 300 MHz, TMDS data rate: 0.75 Gbps to 9 Gbps (*7)
Connector: RJ-45 (*4)
Cable: CAT.5E HDC , Cat5e UTP / STP, Cat6 UTP / STP cable (*5)
VGA / SVGA / XGA / WXGA (1280x768) / WXGA (1280x800) / Quad-VGA / SXGA /
WXGA (1360x768) / WXGA (1366x768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ /
VESAHD / WUXGA / QWXGA / WQHD / WQXGA
* For VESAHD / WUXGA / QWXGA / WQHD / WQXGA, only Reduced Blanking is supported.
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (3840 x 2160) / 4K (4096 x 2160)
1 output
Audio can be distributed to an HDMI output and an HDBaseT output simultaneously.
Multi-channel linear PCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. output level: 0 dBFS
Connector: 2 female HDMI Type A (19-pin), 2 RJ-45
1 output
Stereo L/R balanced / unbalanced
Output impedance: 100 Ω balanced / 50 Ω unbalanced
Reference level: -10 dBu, Max. output level: +10 dBu
Connector: 5-pin terminal block
HDMI / DVI: up to 98 ft. (30m) (1080p@60), up to 39 ft. (12 m) (4K@60) (*8)
HDBaseT: up to 328 ft. (100 m), up to 492 ft. (150 m) (Long Reach Mode) (*9)
HDMI / DVI: up to 98 ft. (30m) (1080p@60), up to 39 ft. (12 m) (4K@60) (*8)
HDBaseT: up to 328 ft. (100 m), up to 492 ft. (150 m) (Long Reach Mode) (*9)
3D Y/C separation
Motion adaptive I/P conversion, Aspect Ratio Control, Picture adjustment (brightness, contrast,
display position, display size, etc.), Seamless Switching (*10)
All function setting through browser, Automatic input detection and switching,
Volume adjustment (volumes of input and output ports can be set separately),
Lip Sync (Max. 16 frames), Audio breakaway enables independent audio and video switching,
Cross-point memory (9 settings), Preset memory (8 settings and startup settings), Last memory,
Anti-Snow (*11), Connection Reset (*12), External control commands (32 commands), Security lock
1 port / 3-pin terminal block
1 port / RJ-45 10Base-T / 100Base-TX (Auto Negotiation), Auto MDI / MDI-X
3 ports / 6-pin terminal block Non-voltage contact input up to DC 24 V 500 mA
3 ports / 7-pin terminal block Controlling keys and LED
RS-232C, LAN, contact closure, PJLink (class1), CEC (power control of sink device) (*13)
100 - 240 VAC ± 10%, 50 Hz / 60 Hz ± 3 Hz
About 77 Watts
16.9 (W) × 1.7 (H) × 13.8 (D)" (430 (W) × 44 (H) × 350 (D) mm)
(EIA 1U high, full rack wide) (Excluding connectors and the like)
11 lbs. (5.0 kg)
Operating: 32°F to 104°F (0°C to +40°C)
Storage: -4°F to +176°F (-20°C to +80°C)
Operating / Storage: 20% to 90% (Non Condensing)
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msd-701uhdMsd-802uhdMsd-801uhd

Table of Contents