Table of Contents
Advertisement
■ From browser
You can capture and save an input video through a WEB browser as well.
Step1) If the memory area is divided, select the registered area of the captured image.
Step2) Set "FREEZE" to "ON". You can skip this step. This freeze is only temporary. If input channel is
switched or input signal changes, the freeze is released and the input video will be output.
Step3) Click the "CAPTURE" button to display the dialog box. Click the "OK" button of the dialog box to
capture the video. If you skip the Step2, the video freezes automatically just after clicking the "OK" button.
①Select the registered area of the captured video (for memory
area division).
②Select the freeze of input video. (You can skip this step)
③Start the capture by clicking the "CAPTURE" button.
.
When capture completes correctly, the message is displayed. Click the "OK" button of the dialog box to
complete
Do not operate the WEB menu or turn off the MSD until the registration completes.
If capture does not start correctly or failed, an error message below will be displayed.
Error message
Video Capture is not available
because there is no input signal.
Memory Size Error is happened.
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
③
②
①
[Fig. 9.35] WEB menu
[Table 9.38] Capture error message
Since input video is not displayed, the video cannot be captured.
Since this input video data is larger than reserved memory area, it
cannot be saved.
【See: 8.7 Web menu operation】
Description
121
Advertisement
Table of Contents
