Table of Contents
Advertisement
8.4
Menu operation
You can register control commands to power the sink device on/off. By pressing the appropriate key, control
commands are sent to the sink device.
DISPLAY
IN 1
POW ER
1
2
[Fig. 8.6] Sink device power control key
Note:
If power a ON/OFF control command is sent to a sink device and reply command of normal termination is sent
from the sink device, the "DISPLAY POWER" key turns orange (when powered ON) or the key light turns off
(when powered OFF).
If the reply command from the sink device is not checked, the actual power status of the sink device and the
LED may not match.
8.5
Locking and unlocking keys
Press and hold the "UNLOCK" key for 2 seconds or longer to set/cancel keylock function for keys below. You
will hear a beep and then one of the following messages is displayed for 1 second.
・OPERATION LOCK ! (Locked)
・OP LOCK RELEASE ! (Unlocked)
DISPLAY POWER keys
[Fig. 8.7] Keys to be set/cancel operation lock (MSD-802HUD)
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
[Table 8.3] Sink device power supply key
IN 2
Sink device power status
Input channel selection keys
【See: 9.13.3 Command link】
Power ON
Power OFF
【See: 9.17.1 Grouping key function lock】
Press and hold the "UNLOCK" key for
2 seconds or longer to set/cancel key lock
LED
Lights (orange)
Turned off
Menu/operation keys
29
Advertisement
Table of Contents
