Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
Do not place the product in any place where it will be subjected to high
temperatures.
If the product is subjected to direct sunlight or high temperatures while under operation, it may affect the
product's performance and reliability and may increase the risk of fire.
Do not place the product in humid, oil smoke filled, or dusty place.
If the product is placed near humidifiers or in a dusty area, it may increase the risk of fire or electric shock.
Do not block the vent holes.
If ventilation slots are blocked, it may cause the product to overheat, affecting performance and reliability and
may increase the risk of fire.
Do not place or stack heavy objects on the product.
Prohibited
Failure to observe this precaution may result in damage to the product and other property and may lead to the
risk of personal injury.
Do not exceed ratings of outlet and wiring devices.
Exceeding the rating of an outlet may increase the risk of fire and electric shock.
Use only the supplied AC adapter and power cable.
Do not use the supplied AC adapter and power cable with other products.
If non-compliant adapter or power cables are used, it may increase the risk of fire or electrical shock. Always
use the supplied AC power connection cable for this product.
Do not plug or unplug with wet hands.
Failure to observe this precaution may increase the risk of electrical shock.
No wet hands
Use and store the product within the specified temperature/humidity range.
If the product is used outside the specified range for temperature and humidity continuously, it may increase the
risk of fire or electric shock.
Turn off devices while making connections to another device.
Failure to observe this precaution may increase the risk of fire or electric shock.
Instruction
If the product won't be used for an extended period of time, unplug it.
Failure to observe this precaution may increase the risk of fire.
Unplug the product before cleaning.
To prevent electric shock.
Unplug
For installation
For rack mount devices:
Mount the product in a the rack meeting EIA standards, and maintain spaces above and
below for air circulation. For your safety, attach an L-shaped bracket in addition to the
panel mount bracket kit to improve mechanical stability.
Instruction
For devices with rubber feet:
Never insert screws without the rubber feet into the threaded holes on the bottom of the
product. Doing so may lead to damage when the screws contact electrical circuitry or
components inside the product.
Instruction
Reinstall the originally supplied rubber feet using only the originally supplied screws.
Altitude:
Do not place the product at elevations of 2,000 meters (6562 feet) or higher above sea
level. Failure to do so may shorten the life of the internal parts and result in malfunctions.
Instruction
6
Caution
Advertisement
Table of Contents
