Setting Control Command - IDK MSD-702UHD User Manual

MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide

9.13 Setting control command

You can control external devices (for example, turning ON/OFF projectors) via RS-232C, LAN, contact
closure, or CEC. You can register up to 32 commands in the MSD. Registered control commands will be
associated with control command execution keys (COMMAND A to COMMAND I) or execution conditions
such as switching video or audio.
When execution conditions are met, those commands will be performed in the order. The loop back function
allows you to control the MSD itself.
<Procedure>
Step (1)
Registering control/reply
command
Step (2)
Associating control command
Step (3)
Executing control command
(from menu/key)
96
Registering control/reply command
Control/reply
制御・返信
command 制御・返信
コマンド
コマンド
Associating control command with switch or key
Executing control command
LAN / RS-232C
communication
command
[Fig. 9.25] Executing control command
Internal loopback
communication
command
Projector power
ON / OFF
Switching channel
HDMI cable
HDMI CEC
control
LC monitor
Power ON / OFF