Resolution For Pcs - IDK MSD-702UHD User Manual

MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
9.10.2

Resolution for PCs

Menu Top→EDID→PC RESOLUTION
Setting for Each input channel
Setting value
・SVGA (800x600)
・XGA (1024x768)
・720p (1280x720)
・WXGA (1280x768)
・WXGA (1280x800)
・Quad-VGA (1280x960)
・SXGA (1280x1024)
・WXGA (1360x768)
[Default] IN1, IN2 : 2160p@60 (3840x2160)
IN3 to IN7 : 1080p (1920x1080)
IN8
*1
IN1, IN2, IN8
*2
IN1, IN2
You can set the resolution requested to be output from source devices.
This setting will also be applied for controlling output resolution when AV devices (such as Blu-ray players)
are connected via HDMI. For digital input, this setting will be valid only if "INTERNAL EDID" is selected for
"9.10.1 EDID".
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
Timing of 720p, 1080i, 1080p, and 2160p is the same as that of HD signal meeting the CEA-861D standard.
For other resolutions, timings meet the VESA DMT or VESA CVT standards.
Set the maximum available resolution for EDID, but the lower resolutions are also supported. Select the
resolution supported by the connected PC.
You can select 2160p (4096x2160) resolution from "9.10.3 Input resolution for AV devices".
If a source device that does not support 4K is connected to the input connector with 4K EDID settings, the
source device may output DVI signal meaning audio is not output. In order to output HDMI signal from the
source device, change the settings of this menu and "9.10.3 Input resolution for AV devices" to a value
other than 4K.
84
・WXGA (1366x768)
・SXGA+ (1400x1050)
・WXGA+ (1440x900)
・WXGA++ (1600x900)
・UXGA (1600x1200)
・WSXGA+ (1680x1050)
・1080i (1920x1080)
・1080p (1920x1080)
: 2160p@30 (3840x2160)
・WUXGA (1920x1200)
・QWXGA (2048x1152)
*1
・WQHD (2560x1440)
・WQXGA (2560x1600)
・2160p@30 (3840x2160)
・2160p@60 (3840x2160)
*1
*1
*2