Copying Output Setting - IDK MSD-72 Series User Manual

9.13.6 Copying output setting

Menu Top→PRESET MEMORY→COPY OUTPUT MEMORY
Setting value OUT1 to OUT4 → OUT1 to OUT4
You can copy the setting data of the selected output channel to other output channels using "MENU/SET"
key.
Menu
Selecting input
channels
(P.30)
Setting position, size,
and masking
(P.52)
Quality setting
(P.58)
Output settings
(P.73)
Audio settings (P.80)
Setting bitmap
(P.117)
Note:
Please note that only one CEC connection is avairable, multiple input and outputs cannot be connected. For
example, CEC connection is copied from this menu, the lowest output (OUT1) is connected preferentially and
the sink device connected to OUT2 cannot output video with CEC.
[Table 9.30] Settings to be copied
Selecting input channels
Output resolution, Aspect ratio for sink device, Aspect ratio,
Aspect ratio control, Overscan, Display position,
Display size, Masking, Background color, Test pattern
Brightness, Contrast, Gamma
Output mode, Synchronous signal output with no input video,
Output video with no input video, Window transaction effect,
Window transaction speed, Wipe color, HDCP,
The number of HDCP retries, Deep Color, CEC connection,
Priority of input channel automatic switching, Masking time after automatic
switching of input channel,
Channel switching mode
Output level, Output mute, Lip sync,
Sampling frequency, Audio output connector, Multi channel audio output,
Test tone
Outputing bitmap image, Background color, Aspect ratio, Display position,
Input channel assignment, Bitmap output at startup
115
MSD-72 Series User's Guide
Description