Table of Contents
Advertisement
9.15.6 Copying output setting
Menu
Top→PRESET MEMORY→COPY OUTPUT MEMORY
Setting value OUT1 to OUT8 → OUT1 to OUT8
You can copy the setting of the selected output channel to other output channels.
Press the MENU/SET key to apply the setting.
Menu
Selecting input channels
Setting position, size,
and masking
Video processing mode
Quality setting
Output settings
Audio setting
Bitmap setting
Note:
Only one CEC connection is available; multiple input and outputs cannot be connected. For example, CEC
connection is copied from this menu, the lowest output (OUT1) is connected preferentially and the sink device
connected to OUT2 cannot output video with CEC.
[Table 9.34] Setting to be copied
Selecting input channels
Output resolution, Aspect ratio for sink device, Aspect ratio,
Aspect ratio control, Overscan, Display position, Display size,
Masking, Background color, Test pattern
Horizontal flip
Brightness, Contrast, Gamma
Output equalizer, Output mode, Synchronous signal output with no input
video, Output video with no input video, Window transaction effect,
Window transaction speed, Wipe color, Output connector, HDCP,
The number of HDCP , Deep Color, CEC,
Priority of input channel automatic switching,
Ignoring duration after automatic switching,
Channel switching mode of automatic switching,
HDBaseT output long reach mode
Output level, Output mute, Lip sync, Sampling frequency,
Analog audio output connector, Multi channel audio output, Test tone
Outputting bitmap image, Background color, Aspect ratio, Display position,
Assigning input channel, Startup bitmap output
MSD-62 Series User's Guide
Description
133
Advertisement
Table of Contents
