Chapter 7
X330WAN CLI Commands
The following figure illustrates this introduction.
Figure 7.1
Controller Context
X330WAN CLI Prompts
The following table displays examples of X330WAN-2DS1 CLI prompts.
Table 7.1
Mode/Context
User
Supervisor
Configure
Controller
Interface
Console
Interface Fast
Ethernet
Interface Fabric
Fast Ethernet
Interface
Loopback
Interface Serial
N is the number of the device in a stack of WAN devices, n is the number of the
WAN port ("1" or "2"), Z is the interface number, and x is the number of the channel
group.
46
X330WAN CLI Contexts
User Mode
Configure Context
- Interface Console Context or
- Interface Fast Ethernet Context or
- Interface Fabric Fast Ethernet Context or
- Interface Loopback Context or
- Interface Serial Context
X330WAN-2DS1 CLI Prompts
Prompt
X330WAN-2DS1-N>
X330WAN-2DS1-N(super)#
X330WAN-2DS1-N(configure)#
X330WAN-2DS1-N(config-controller:n)#
X330WAN-2DS1-N(config-if:CON)#
X330WAN-2DS1-N(config-if:FastEthernet1)#
X330WAN-2DS1-N(config-if:FabricFastEthernetn)#
X330WAN-2DS1-N(config-if:LoopbackZ)#
X330WAN-2DS1-N(config-if:Serialn:x)#
Other Contexts
Avaya X330W-2DS1 User's Guide