Table of Contents
Advertisement
Chapter 7
X330WAN CLI Commands
Last warning
show time
Use the show time command to display the current device time.
The syntax for this command is:
show time
Output Example:
X330WAN-2DS1-1(super)# show time
10:32:34 27 JAN 2000 GMT
show time parameters
Use the show time parameters command to display the status and
parameters.
The syntax for this command is:
show time parameters
X330WAN-2DS1-1(super)# show time parameters
Client status: Enabled
Current time : L:01:38:31 01 JAN 1970 GMT
Timezone set to 'GMT', offset from UTC is 0 hours
Time-Server
Time acquired from Time-Server: 0.0.0.0
Time protocol set to
show timezone
Use the show timezone command to display the current device timezone.
The syntax for this command is:
show timezone
Output Example:
X330WAN-2DS1-1(super)# show timezone
Timezone set to 'GMT', offset from UTC is 0 hours
sync time
Use the sync time command to synchronize the time.
62
: No-warning
: 0.0.0.0
(I.e. broadcast address)
: TIME protcol
Avaya X330W-2DS1 User's Guide
Advertisement
Table of Contents
Troubleshooting
