Removing An X330Wan Module From An Avaya P330 Switch - Avaya X330W2-DS1 User Manual

Chapter 2 Installation
Figure 2.1
Note: All LEDs light while the P330 resets.
The P330 switch front panel LEDs consist of Port LEDs and Function LEDs. The Port
LEDs display information for each port according to the illuminated function LED.
The function is selected by pressing the Left/Right switch until the desired
parameter LED is illuminated. Pressing the same switch again will move to the next
function.
When the X330WAN module is installed inside a P330 switch, Port LED number 51
displays the status of the X330WAN Fast Ethernet port. As a result, only Port LED
number 51 illuminates when the X330WAN is in use.
For a description of the other LEDs on the front panel of the Avaya P330 switch,
refer to the User's Guide that accompanies your switch.

Removing an X330WAN Module from an Avaya P330 Switch

To remove an X330WAN module from a P330 switch:
1 Loosen the screws on the front panel of the X330WAN module that secure the
16
LED Indicators for a WAN Access Router Module on the Avaya P330 Front
Panel
Avaya X330W-2DS1 User's Guide