Network (Router-Rip Context); Ping - Avaya X330W2-DS1 User Manual

Examples:
X330WAN-2DS1-1(configure router:ospf)# network 192.168.0.0
X330WAN-2DS1-1(configure router:ospf)# network 192.168.0.0
0.0.255.255 area 0.0.0.0

network (Router-RIP Context)

Use the network command to specify a list of networks on which the RIP is
running. The no form of this command removes an entry.
The syntax for this command is:
[no] network <ip-address> [<wildcard-mask>]
ip addr
wildcard-mask
Example:
To specify that RIP will be used on all interfaces connected to the network
192.168.37.0:
X330WAN-2DS1-1(configure router:rip)# network 192.168.37.0

ping

Use the ping command to check host reachability and network connectivity.
The syntax for this command is:
ping <host> [<interval> [<size>[timeout[source address]]]]
host
interval
size
timeout
source address
Avaya X330W-2DS1 User's Guide
The IP address of the network of directly connected networks
Wildcard mask address. Exists for compatibility with P550.
IP address of the target system.
An integer, the number of seconds between
successive ping messages. The default is 1 second.
An integer, the size of the packet sent during a ping
operation. The default is 50 bytes.
Timeout in seconds (1-10).
IP address.
Layer 3 CLI Commands
87