Show Ip Access-List-Summary; Show Ip Active-Access-Groups; Show Ip Composite-Op - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands
Example:
X330WAN-2DS1-1(configure)# show ip access-list details 101

show ip access-list-summary

Use the show ip access-list-summary command to display the policy list
summary.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
show ip access-list-summary

show ip active-access-groups

Use the show ip active-access-groups command to display all activated
lists on all interfaces.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
show ip active-access-groups

show ip composite-op

Use the show ip composite-op command to show a composite operation of a
policy list.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
show ip composite-op [<policy-list-number>] [<composite-
operation-index>
policy-list-number
118
The policy list number (integer from 100 to 199).
Entering 0 displays the default list.
Avaya X330W-2DS1 User's Guide