Timers Spf (Router-Ospf Context); Traceroute - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands
Example:
X330WAN-2DS1-1(configure router:rip)# timers basic 30 180

timers spf (Router-OSPF context)

Use the timers spf command to configure the delay between runs of OSPF's
SPF calculation. Use the no form of this command to restore the default (3 seconds).
The syntax for this command is:
[no] timers spf <spf-holdtime>
spf-holdtime
Example:
X330WAN-2DS1-1(super)# timers spf 5

traceroute

Use the traceroute command as a trace route utility.
The syntax for this command is:
traceroute <host>
host
Example:
X330WAN-2DS1-1(super)# traceroute 192.168.50.13
100
The time in seconds of the delay between runs of
OSPF's SPF calculation. The range of acceptable
values is 1 to 3600.
IP address
Avaya X330W-2DS1 User's Guide