(Ip Vrrp) Primary; (Ip Vrrp) Priority - Avaya X330W2-DS1 User Manual

The syntax for this command is:
[no] ip vrrp <vr-id> preempt
vr-id
Example:
X330WAN-2DS1-1(configure)# ip vrrp 1 preempt

(ip vrrp) primary

Use the ip vrrp primary command to set the primary address that shall be
used as the source address of VRRP packets for the virtual router ID. Use the no
form of this command to return to the default primary address for the virtual router
instance. By default, the primary address is selected automatically by the device.
Note: This command is executed from the Fast Ethernet and Fabric Fast Ethernet
interfaces.
The syntax for this command is:
[no] ip vrrp <vr-id> primary <ip-address>
vr-id
ip-address
Example:
ip vrrp 1 primary 192.168.66.23

(ip vrrp) priority

Use the priority option to set the virtual router priority value used when
selecting a master router. Use the no form of this command to restore the default
value.
Note: This command is executed from the Fast Ethernet and Fabric Fast Ethernet
interfaces.
Avaya X330W-2DS1 User's Guide
Virtual Router ID (1-255)
Virtual Router ID (1-255)
Primary IP address of the virtual router. This address
should be one of the router addresses on the Fabric.
Layer 3 CLI Commands
85