Default-Metric (Router-Ospf Context); Default-Metric (Router-Rip Mode); Distribution-List (Router-Rip Mode) - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands
The syntax for this command is:
[no] default-metric <number>
number
Example:
X330WAN-2DS1-1(configure:interface)# default-metric 10

default-metric (Router-OSPF context)

Use the default-metric command to set the default metric of redistributed
routes. The no form of this command restores the default. The default metric is 20.
The syntax for this command is:
[no] default-metric <default metric>
default metric
Example:
X330WAN-2DS1-1(configure router:ospf)# default-metric 50

default-metric (Router-RIP Mode)

Use the default-metric command to set the default metric of redistributed
routes. The no form of this command restores the default. The default metric is 1.
The syntax for this command is:
[no] default-metric <default metric>
default metric
Example:
X330WAN-2DS1-1(configure router:rip)# default-metric 5

distribution-list (Router-RIP Mode)

Use the distribution-list command to filter incoming/outgoing networks in
route updates. The no form of this command deactivates the filter.
The syntax for this command is:
[no] distribution-list <access-list-number> <type>
66
The interface route metric value. The range is 1 to 15.
An integer. The range is 1 to 65535.
The interface RIP route metric value. The range is 1 to 16.
Avaya X330W-2DS1 User's Guide