Ip Access-List-Name; Ip Access-List-Owner - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands
trust-cos | trust-dscp | trust-cos-dscp}
policy-list-number
Example:
X330WAN-2DS1-1(super)# ip access-list-dscp trust 101 trust-
dscp

ip access-list-name

Use the ip access-list-name command to set a name for a policy list.
The syntax for this command is:
ip access-list-name <policy-list-number> <name>
policy-list-number
name
Example:
X330WAN-2DS1-1(super)# ip access-list-name 101 morning
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".

ip access-list-owner

Use the ip access-list-owner command to set the owner for a specific policy
list.
The syntax for this command is:
ip access-list-owner <policy-list-number> <owner>
policy-list-number
owner
106
An integer (100..199), or for the X330WAN
(100..149) where 0 is the default list.
An integer (100..199), or for the X330WAN
(100..149) where 0 is the default list.
List name
An integer (100..199), or for the X330WAN
(100..149) where 0 is the default list.
List owner
Avaya X330W-2DS1 User's Guide