Chapter 7
X330WAN CLI Commands
Example:
X330WAN-2DS1-1(configure)# ping 149.49.50.13 5 8
Output Example:
X330WAN-2DS1-1(configure)# ping 149.49.54.1
Reply from 149.49.54.1: bytes=32 time=17ms TTL=64
Reply from 149.49.54.1: bytes=32 time=1ms TTL=64
Reply from 149.49.54.1: bytes=32 time=17ms TTL=64
Ping statistics for 149.49.54.1:
Packets: sent = 3, Received = 3, Lost = 0 (0% loss)
Approximate round trip times in milli-seconds:
Minimum = 1, Maximum = 17, Average = 9
redistribute (Router-OSPF context)
Use the redistribute command to redistribute routing information from other
protocols into OSPF. The no form of this command disables redistribution by
OSPF.
The syntax for this command is:
[no] redistribute <protocol>
protocol
Example:
X330WAN-2DS1-1(configure router:ospf)# redistribute static
redistribute (Router-RIP context)
Use the redistribute command to redistribute routing information from other
protocols into RIP. The no form of this command disables redistribution by RIP.
The default is disabled.
The syntax for this command is:
[no] redistribute <protocol>
protocol
Example:
X330WAN-2DS1-1(configure router:rip)# redistribute ospf
88
[static|connected|rip]
Either Static or OSPF
Avaya X330W-2DS1 User's Guide