Features; Layer 1 Features; Layer 2 Features - Avaya X330W2-DS1 User Manual

expansion slots, either of the P330 stack or of the G700. Standard IP phones can be
connected to the P330 stack, or Avaya Legacy phones can be connected directly to
the G700 Gateway. In this solution the X330WAN provides access to the corporate
WAN, while end-to-end QoS and Policy ensure that the IP telephony functions
flawlessly.

Features

An Avaya P330 stack may have X330WAN access router modules inserted in each
of the switches in the stack with an expansion slot. A maximum stack configuration
of 10 P334T switches using the X330W-2DS1 provides 480 Ethernet 10/100 ports,
and 20 E1/T1 ports. The X330W-2DS1 is the first product of the X330WAN series.
The following is a list of X330W-2DS1 features.

Layer 1 Features

• 2 channelized/fractionalized E1/T1 ports, RJ-48 connectors.
• 10/100Base-T Auto Negotiation Fast Ethernet port.
• 100 Mbps, Full Duplex Fabric Fast Ethernet interface (for internal connection to
the P330).
• Serial RS-232, RJ-45 port for console and dial-in modem connection.

Layer 2 Features

• PPP over channeled and fractional E1/T1. The X330WAN has the ability to map
several PPP sessions to a single E1/T1 interface.
• Support for up to 253 VLANs on the Fabric Fast Ethernet LAN interface. Any
combination of these VLANs can be configured to the X330WAN module.
• Auto-Negotiation - the 10/100 port on the X330WAN supports
Auto-Negotiation which automatically detects and supports the duplex mode
and speed of a connected device. This means that you can simply connect the
X330WAN to Ethernet or Fast Ethernet equipment at full or half duplex without
configuration.
• VLANs - VLANs assigned on the Fabric Fast Ethernet port enable the
X330WAN to perform inter-VLAN routing. This enables the user to configure
specific VLANs to access the X330WAN, while the remaining VLANs are
denied access to the WAN.
Avaya X330W-2DS1 User's Guide
Features
3