Ip Access-List-Dscp Operation; Ip Access-List-Dscp Name - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands

ip access-list-dscp operation

Use the ip access-list-dsc operation command to set a DSCP to action.
Note: This command is only supported by the P333R-LB device and X330WAN
module.
The syntax for this command is:
ip access-list-dscp operation <policy-list-number> <dscp>
<action>
policy-list-number
dscp
action
Example:
X330WAN-2DS1-1(super)# ip access-list-dscp operation 101 9-16
fwd3

ip access-list-dscp name

Use the ip access-list-dscp name command to set a DSCP name.
Note: This command is only supported by the P333R-LB device and X330WAN
module.
The syntax for this command is:
ip access-list-dscp name <policy-list-number> <dscp> <name>
policy-list-number
dscp
name
104
An integer (100..199), or for the X330WAN
(100..149), where 0 is the default list.
Range of DSCP
Action name
An integer (100..199), or for the X330WAN
(100..149), where 0 is the default list.
DSCP entry (0-63)
Entry name
Avaya X330W-2DS1 User's Guide