(Ip Vrrp) Override Addr Owner; (Ip Vrrp) Preempt - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands
The syntax for this command is:
[no] ip vrrp <vr-id> auth-key <key-string>
vr-id
key-string
ip vrrp 1 primary 192.168.66.23

(ip vrrp) override addr owner

Use the ip vrrp override addr owner command to accept packets
addressed to the IP address(es) associated with the virtual router, such as ICMP,
SNMP, and TELNET (if it is not the IP address owner). Use the no form of this
command to discard these packets.
Note: This command is executed from the Fast Ethernet and Fabric Fast Ethernet
interfaces.
The syntax for this command is:
[no] ip vrrp <vr-id> override addr owner
vr-id
Example:
X330WAN-2DS1-1(configure)# ip vrrp 1 override addr owner

(ip vrrp) preempt

Use the ip vrrp preempt command to configure the router to preempt a lower
priority master for the virtual router ID. Use the no form of this command to disable
preemption for the virtual router instance. By default, preemption is enabled.
Note: This command is executed from the Fast Ethernet and Fabric Fast Ethernet
interfaces.
84
Virtual Router ID (1-255)
Simple password string
Virtual Router ID (1-255)
Avaya X330W-2DS1 User's Guide