Chapter 7
X330WAN CLI Commands
The syntax for this command is:
show ip ospf neighbor
[<interface-name>] [<neighbor-id>]
interface-name
neighbor-id
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Output Example:
X330WAN-2DS1-1(super router:ospf)# show ip ospf neighbor
There are no ospf neighbors
show ip protocols
Use the ip protocols command to display parameters and statistics of the IP
routing protocol process.
The syntax for this command is:
show ip protocols [<protocol>]
protocol
Examples:
show ip protocols
show ip protocols RIP
94
A string, the OSPF interface name
Neighbor ID, an IP address.
RIP | OSPF
Displays all running protocols details.
Displays RIP details.
Avaya X330W-2DS1 User's Guide