Ip Address - Avaya X330W2-DS1 User Manual

[<interface>|<protocol>]
access-list-number
type
interface-type
interface-number
protocol
Examples:
X330WAN-2DS1-1(configure router:rip)# distribution-list 10 in
"FabricFastEthernet 1"
X330WAN-2DS1-1(configure router:rip)# distribution-list 20 out
"Serial 1:1"
X330WAN-2DS1-1(configure router:rip)# distribution-list 40 out
ospf

ip address

Use the ip address command to assign an IP address and mask to an interface.
The no form of the command deletes an IP interface.
The syntax for this command is:
[no] ip address <ip-address> <mask> [<admin-state>]
ip address
mask
admin-state
Example:
To assign the IP address 192.168.22.33 with mask 255.255.255.0 to the interface
"marketing":
X330WAN-2DS1-1(configure)# ip address 192.168.22.33
X330WAN-2DS1-1(configure)# ip address 255.255.255.0
Avaya X330W-2DS1 User's Guide
An integer. The range is 1 to 99.
[in | out]
The interface type, a string.
The interface number.
[static | ospf]
Protocol is only relevant for outgoing (out) list entries.
The IP address assigned to the interface
Mask for the associated IP subnet
The administration status – either Up or Down (default is Up).
This parameter is not applicable for the Console interface of the
X330WAN.
Layer 3 CLI Commands
67