Ip Distribution Access-Default-Action; Ip Distribution Access-List - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands

ip distribution access-default-action

Use the ip distribution access-default-action command to set the
default action for a specific policy list.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
ip distribution access-default-action <list-number> <default-
action>
policy-list-number
default-action
Example:
X330WAN-2DS1-1(configure)# ip distribution access-default-
action 1 default-action-deny

ip distribution access-list

Use the ip distribution access-list command to create a distribution
policy statement.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
ip distribution access-list <policy-list-number>
<access-list-index> <action>
{<dest-ip> [<dest-wildcard>]|any}
policy-list-number
access-list-index
action
dest-ip
dest-wildcard
110
An integer (1..99)
default-action-deny|default-action-permit
An integer (1..99)
An integer
permit|deny
IP network address
IP network wildcard address
Avaya X330W-2DS1 User's Guide