Chapter 2 Installation; Safety Information; Device Support; Before You Install - Avaya X330W2-DS1 User Manual

Chapter 2
Installation
This chapter describes the X330WAN installation procedure.

Safety Information

Warning: Installation and removal of the X330WAN must only be implemented by
qualified personnel.
Caution: Hold the X330WAN only by the edges to avoid damage from static
electricity. Do not touch the top or bottom of the circuit board. If possible, wear a
wrist-strap and use an anti-static bag.

Device Support

The X330WAN enables you to connect your Avaya P330 switch to a WAN.
The X330WAN can be inserted into switches of the Avaya P330 product line which
include an expansion slot. These include the following Avaya P330 family switches:
• Avaya P333T Embedded S/W Ver. 3.9 and higher
• Avaya P334T Embedded S/W Ver. 3.9 and higher
• Avaya P332MF Embedded S/W Ver. 3.9 and higher
• Avaya P333R Embedded S/W Ver. 3.9 and higher
• Avaya P333R-LB Embedded S/W Ver. 3.9 and higher
• Avaya P333T-PWR Embedded S/W Ver. 3.9 and higher

Before You Install

The X330WAN can only be installed in the above Avaya switches using firmware
ver. 3.9 or higher. If you need to upgrade the software, obtain the latest version of
the software from
the instructions found in the User's Guide that accompanies your Avaya P330
switch.
You can see the firmware version of your Avaya switch using the
"show image version" command.
Avaya X330W-2DS1 User's Guide
http://www.avaya.com/support and download it according to
13