Ip Ospf Cost (Interface Context); Ip Ospf Dead-Interval (Interface Context); Ip Ospf Hello-Interval (Interface Mode) - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands

ip ospf cost (Interface context)

Use the ip ospf cost command to configure interface metric. The no form of
this command sets the cost to its default. The default is 1.
Note: This command is executed from the Serial, Loopback, Fast Ethernet and
Fabric Fast Ethernet interfaces.
The syntax for this command is:
[no] ip ospf cost <cost>
cost
Example:
ip ospf cost 10

ip ospf dead-interval (Interface context)

Use the ip ospf dead-interval command to configure the interval before
declaring the neighbor as dead. The no form of this command sets the dead-
interval to its default. The default is 40.
Note: This command is executed from the Serial, Loopback, Fast Ethernet and
Fabric Fast Ethernet interfaces.
The syntax for this command is:
[no] ip ospf dead-interval <seconds>
seconds
Example:
ip ospf dead-interval 15

ip ospf hello-interval (Interface Mode)

Use the ip ospf hello-interval command to specify the time interval
between hello's the router sends. The no form of this command sets the hello-
interval to its default. The default is 10.
74
An integer in the range 1 to 65535.
An integer in the range 1 to 65535.
Avaya X330W-2DS1 User's Guide