Chapter 7
X330WAN CLI Commands
show snmp
Use the show snmp command to display SNMP information.
The syntax for this command is:
show snmp
Output Example:
X330WAN-2DS1-1(super)# show snmp
Authentication trap disabled
Community-Access
----------------
read-only
read-write
trap
----------------
1.1.1.1
show startup-config
Use the show startup-config command to show the NVRAM based
configuration loaded automatically at startup.
The syntax for this command is:
show startup-config
show system
Use the show system command to display the up time, system name, location,
and contact person.
The syntax for this command is:
show system
Output Example:
X330WAN-2DS1-1(super)# show system
Uptime d,h:m:s
------------------------
0,2:40:55
System Name
60
Community-String
----------------
public
public
public
----------------
duplicate_ip
ip_vlan_violation
etc...
System Location
System Contact
Avaya X330W-2DS1 User's Guide