Set System Name; Set Time Client; Set Time Protocol - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands
The syntax for this command is:
set system location [location string]
location string
Example:
set system location "Floor 5,Room 12"

set system name

Use the set system name command to set mib2 system name MIB variable.
The syntax for this command is:
set system name [name string]
name string
Example:
set system name "Banking System"

set time client

The set time client command is used to enable or disable the periodic
network time acquisition by the device from the network time server (SNTP or
TIME protocol).
The syntax for this command is:
set time client {enable|disable}

set time protocol

Use the set time protocol command to set the protocol for use in the system as either
SNTP protocol or TIME protocol.
The syntax for this command is:
set time protocol
56
Location name. The location name is cleared if this field is left
blank. A string of 2 words or more must be type in quotation
marks – e.g. "Operations Floor".
System name. The system name is cleared if this field is left
blank. A string of 2 words or more must be type in quotation
marks – e.g. "Backbone Stack".
[sntp-protocol|time-protocol]
Avaya X330W-2DS1 User's Guide