Table of Contents
Advertisement
Output Example:
X330WAN-2DS1-1(configure)# show line console
Console
ppp state disable
Asynchronic mode terminal
Baud rate is 38400
Timeout is 0
ppp authentication none
show logout
Use the show logout command to display the CLI logout.
The syntax for this command is:
show logout
Output Example:
X330WAN-2DS1-1(configure)# show logout
CLI timeout is 15 minutes
show queueing
Use the show queueing command to display the priority queue size, in packets.
The syntax for this command is:
show queueing [<interface type> <identifier>]
interface
type
identifier
Avaya X330W-2DS1 User's Guide
The type of this interface. Select one of the following:
FastEthernet | Serial | FabricFastEthernet
• For a FastEthernet interface - An integer (1)
• For a Serial interface - <port>:<channel-group>
• For a FabricFastEthernet interface - An integer (1)
<port> - Either 1 or 2
<channel-group> - For E1, an integer, 0-30
For T1, an integer, 0-23
WAN CLI Commands
147
Advertisement
Table of Contents
Troubleshooting
