Table of Contents
Advertisement
Chapter 7
X330WAN CLI Commands
show ip route
Use the show ip route command to display information about the IP routing
table.
The syntax for this command is:
show ip route [<ip-address>[<ip-mask>]
ip-address
ip-mask
Examples:
show ip route
show ip route 137.32.50.13
show ip route 137.44.50.13 255.255.255.0
show ip route best-match
Use the show ip route best-match command to display a routing table for a
destination address.
The syntax for this command is:
show ip route best-match <dst addr>
dst addr
Output Example:
X330WAN-2DS1-1(super)# sh ip route best-match 199.93.0.0
Searching for: 199.93.0.0
Showing 1 rows
Network
--------------- --------------- ------------ --------------- ----- --- -----
199.93.0.0
show ip route static
Use the show ip route static command to display the static routes.
96
The IP address of the routes
The IP mask of the routes
IP address
Mask
Interface
255.255.0.0
e-135new
Display all routes
Display a single route
Display range of routes
Next-Hop
Cost
TTL
135.64.76.1
1 n/a STAT-HI
Avaya X330W-2DS1 User's Guide
Source
Advertisement
Table of Contents
Troubleshooting
