Ip Access-List - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands
out

ip access-list

Use the ip access-list command to create a specific policy rule. This
command defines a policy rule. The access list contains several of these rules. Each
rule pertains to the source IP address, the destination IP address, the protocol, the
protocol ports (tcp/udp if relevant), and to the ACK bit (in TCP protocol). To delete
a specific rule, use the no form of this command.
The syntax for this command for the X330WAN is:
[no] ip access-list <policy-list-number> <access-list-index>
access-list-number
policy-list-number
access-list-index
command
action
protocol
source-ip
source-wildcard
operator
port
destination-ip
destination-wildcard
precedence
102
<action> <protocol> {<source-ip>
<source-wildcard>|any|host
<source-ip>} [<operator> <port> [<port]]
{<destination-ip> <destination-
wildcard>|any|host
<destination-ip>}[<operator> <port>
[<port>]][established] [precedence]
An integer (100..149)
An integer (100..149)
An integer (1...9999)
permit|deny|deny-and-notify|fwd0-7
permit|deny|deny-and-notify|fwd0-7|
composite op name
ip|tcp|udp|integer (1..255)
IP network
IP network wildcard
eq|lt|gt|range
An integer (1..65535)
IP network
IP network wildcard
mandatory|optional
Avaya X330W-2DS1 User's Guide