Troubleshooting VoIP Transmission
To enable VoIP, the following must be configured on the devices at both ends of the
connection:
•
VoIP must be enabled on both ends.
•
The RTP port range must be the same on both ends.
•
The devices on both ends must be configured according to the running voice
applications.
When the device on the other end is a non-Avaya device:
•
Configure the non-Avaya device for the maximum amount of connections (255).
•
Configure the port range of the Avaya device to: 49152 - 65535.
•
Configure the "non-ietf" working mode using the command:
ip rtp non-tcp mode
Avaya X330W-2DS1 User's Guide
Troubleshooting VoIP Transmission
37