Running The Embedded Manager - Avaya X330W2-DS1 User Manual

Chapter 6 Embedded Web Manager

Running the Embedded Manager

Note: You should assign an IP address to the X330WAN before beginning this
procedure.
1 Open your browser.
2 Enter the url of the switch in the format http://aaa.bbb.ccc.ddd where
aaa.bbb.ccc.ddd is the IP address of the switch.
Note: The user name is "root"
The default password for read-write access is "root".
Note: The Web management passwords are the same as those of the CLI. If you
have created additional CLI user names or changed the default passwords then you
can use those passwords for Web management as well.
The welcome page is displayed:
Figure 6.1
40
The Welcome Page
Avaya X330W-2DS1 User's Guide