Timers Basic (Router-Rip Context) - Avaya X330W2-DS1 User Manual

IP addresses:
192.168.66.23
Primary IP Address:
Primary IP Address was chosen by default
Preemption Mode:
# of times Master:
# of received Advertisements:
# of transmitted Advertisements:
# of received Advertisements with Security Violations: 0
Virtual Router on VLAN:
Router-id:
State:
Priority:
Advertisement Interval:
Last State Change:
Override Address Ownership Rule: No
Authentication Type:
Authentication Key:
Master IP Address
Has 1 IP addresses
IP addresses:
192.168.66.24
Primary IP Address:
Primary IP Address was chosen by default
Preemption Mode:
# of times Master:
# of received Advertisements:
# of transmitted Advertisements:
# of received Advertisements with Security Violations: 0

timers basic (Router-RIP context)

Use the timers basic command to set RIP timers. The no form of this command
to set the RIP timers to their default.
The syntax for this command is:
[no] timers basic <update> <invalid>
update
invalid
Avaya X330W-2DS1 User's Guide
enabled
1
2
BACKUP
100
1
00:00:00
None
""
0.0.0.0
192.168.66.23
enabled
RIP update timer, in seconds.
RIP invalid route timer, in seconds.
Layer 3 CLI Commands
192.168.66.23
2
0
20
1
0
13
99